|
|
Zeile 2: |
Zeile 2: |
| [[File:Stairville_LED_PAR_64_10mm_RGB_silver.jpg|142px|right]] | | [[File:Stairville_LED_PAR_64_10mm_RGB_silver.jpg|142px|right]] |
| | | |
− | Ein DMX-Bus zieht sich durch unsere Räume. Die daran angeschlossenen Geräte sind über das Controller-Pult steuerbar. | + | Ein DMX-Bus zieht sich durch unsere Räume. Die daran angeschlossenen Geräte sind per Home Assistant und über die Taster am Eingang steuerbar. |
| | | |
| * [http://en.wikipedia.org/wiki/DMX512 Wikipedia zum Thema DMX512] | | * [http://en.wikipedia.org/wiki/DMX512 Wikipedia zum Thema DMX512] |
Zeile 8: |
Zeile 8: |
| | | |
| = Vorhandene Hardware = | | = Vorhandene Hardware = |
− | [[File:DMX-Master_MK_II_ENC_-_Frontansicht.jpg|400px|right]]
| |
| | | |
− | * [http://www.thomann.de/de/stairville_dmxmaster_mkii_pt.htm Controller: Stairville DMX-Master MK II ENC]
| + | == In Gebrauch == |
− | ** [http://images4.thomann.de/pics/atg/atgdata/document/manual/236071_bda_dmx_master_iii_de_screen.pdf Bedienungsanleitung]
| + | |
− | ** [http://images4.thomann.de/pics/atg/atgdata/document/manual/sv_dmx_master1_reset_multi.pdf Reset-Anleitung]
| + | |
| | | |
− | * [http://www.thomann.de/de/eurolite_usb_dmx512_pro_interface.htm Eurolite USB-DMX512-PRO Interface] | + | * Scheinwerfer: [http://www.thomann.de/de/stairville_led_par_64_10_mm_silver_rgb.htm 22x Stairville LED PAR 64 10mm RGB silver] |
− | ** [http://images4.thomann.de/pics/atg/atgdata/document/manual/usb_dmx512_pro.pdf Bedienungsanleitung] | + | ** [http://images4.thomann.de/pics/atg/atgdata/document/manual/c_115012_de_online_5.pdf Bedienungsanleitung mit DMX-Kanalbelegung] |
− | ** [https://github.com/OpenLightingProject/ola Open Lighting Architecture - Daemon und Library zur Ansteuerung]
| + | |
| | | |
− | * [http://www.thomann.de/de/stairville_led_bar_252_rgb.htm 1x Stairville LED Bar 252 DMX RGB] | + | * LED Bar: [http://www.thomann.de/de/stairville_led_bar_252_rgb.htm 1x Stairville LED Bar 252 DMX RGB] |
| ** [http://images4.thomann.de/pics/atg/atgdata/document/manual/c_255364_234564_de_online.pdf Bedienungsanleitung mit DMX-Kanalbelegung] | | ** [http://images4.thomann.de/pics/atg/atgdata/document/manual/c_255364_234564_de_online.pdf Bedienungsanleitung mit DMX-Kanalbelegung] |
| | | |
− | * [http://www.thomann.de/de/stairville_led_par_64_10_mm_silver_rgb.htm 22x Stairville LED PAR 64 10mm RGB silver] | + | * DMX Splitter: [http://www.thomann.de/de/stairville_dmx_splitter_2.htm Stairville DMX Splitter 2] |
− | ** [http://images4.thomann.de/pics/atg/atgdata/document/manual/c_115012_de_online_5.pdf Bedienungsanleitung mit DMX-Kanalbelegung]
| + | |
− | | + | |
− | * [http://www.thomann.de/de/stairville_dmx_splitter_2.htm Stairville DMX Splitter 2]
| + | |
| ** Durch Verwendung von 5pol-3pol-Adaptern können wir insgesamt 4 Zweige benutzen. Das sollte bei den kurzen Entfernungen keine Probleme machen. | | ** Durch Verwendung von 5pol-3pol-Adaptern können wir insgesamt 4 Zweige benutzen. Das sollte bei den kurzen Entfernungen keine Probleme machen. |
| | | |
− | * [http://www.thomann.de/de/american_dj_dmx_terminal_resistor_set.htm 2x American DJ DMX terminal resistor] | + | * Terminator: [http://www.thomann.de/de/american_dj_dmx_terminal_resistor_set.htm 2x American DJ DMX terminal resistor] |
| ** Im Grunde nur ein XLR-Stecker mit 110Ω Widerstand zwischen +/- | | ** Im Grunde nur ein XLR-Stecker mit 110Ω Widerstand zwischen +/- |
| + | |
| + | |
| + | == Nicht mehr in Gebrauch == |
| + | |
| + | * [http://www.thomann.de/de/stairville_dmxmaster_mkii_pt.htm Controller: Stairville DMX-Master MK II ENC] |
| + | ** [http://images4.thomann.de/pics/atg/atgdata/document/manual/236071_bda_dmx_master_iii_de_screen.pdf Bedienungsanleitung] |
| + | ** [http://images4.thomann.de/pics/atg/atgdata/document/manual/sv_dmx_master1_reset_multi.pdf Reset-Anleitung] |
| + | |
| + | * [http://www.thomann.de/de/eurolite_usb_dmx512_pro_interface.htm Eurolite USB-DMX512-PRO Interface] |
| + | ** [http://images4.thomann.de/pics/atg/atgdata/document/manual/usb_dmx512_pro.pdf Bedienungsanleitung] |
| + | ** [https://github.com/OpenLightingProject/ola Open Lighting Architecture - Daemon und Library zur Ansteuerung] |
| | | |
| | | |
Zeile 38: |
Zeile 42: |
| ! !! +0 !! +16 !! +32 !! +48 !! +64 !! +80 !! +96 !! +112 !! | | ! !! +0 !! +16 !! +32 !! +48 !! +64 !! +80 !! +96 !! +112 !! |
| |- | | |- |
− | | 1 || <span style="background-color:red"> </span><span style="background-color:green"> </span> || <span style="background-color:red"> </span><span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || 128 | + | | 1 || <span style="background-color:red"> </span><span style="background-color:green"> </span><span style="background-color:red"> <span style="background-color:green"> </span> || <span style="background-color:red"> </span><span style="background-color:green"> </span><span style="background-color:red"> <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || 128 |
| |- | | |- |
| | 129 || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || 256 | | | 129 || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || <span style="background-color:green"> </span> || 256 |
Zeile 50: |
Zeile 54: |
| Die Scanner-Tasten am Pult sind in einem 16-Kanal-Raster belegt. | | Die Scanner-Tasten am Pult sind in einem 16-Kanal-Raster belegt. |
| | | |
− | Die Lichter im Vortragsbereich und im Gang zu den Werkstätten sind über die Taste 1, die Lichter im Hackcenter sind über die Taste 2 jeweils auf Kanal 1-7 steuerbar. | + | Die Lichter im Vortragsbereich und im Gang zu den Werkstätten sind über die Taste 1, die Lichter im Hackcenter sind über die Taste 2 jeweils auf Kanal 1-7 steuerbar. Page Select drücken, um in die jeweils andere Gruppe zu wechseln. |
| | | |
| {| class="wikitable" style="text-align: left;" | | {| class="wikitable" style="text-align: left;" |
| |+DMX-Kanalbelegung | | |+DMX-Kanalbelegung |
| |- | | |- |
− | ! Scanner-Taste !! Gerät !! DMX Channel !! DIP
| + | ! Gerät !! DMX Channel !! DIP |
| |- | | |- |
− | | 1 || Scheinwerfer Vortragsbereich || 1 - 11 || 1
| + | | Scheinwerfer Vortragsbereich (Gruppe A) || 1 - 7 || 1 |
| |- | | |- |
− | | 2 || Scheinwerfer Hackcenter || 17 - 23 || 1,5 | + | | Scheinwerfer Vortragsbereich (Gruppe B) || 9 - 15 || 1,4 |
| + | |- |
| + | | Scheinwerfer Hackcenter (Gruppe A) || 17 - 23 || 1,5 |
| + | |- |
| + | | Scheinwerfer Hackcenter (Gruppe B) || 25 - 31 || 1,4,5 |
| |} | | |} |
| + | |
| + | |
| + | = Integration in Home Assistant = |
| + | Die Scheinwerfer sind wie folgt im Home Assistant eingebunden: |
| + | |
| + | Home Assistant -> ESPHome -> ESP8266 -> [https://wiki.seeedstudio.com/Grove-DMX512/ Grove-DMX512] -> Scheinwerfer |
| + | |
| + | == ESPHome Config == |
| + | <pre> |
| + | esphome: |
| + | name: dmx |
| + | |
| + | esp8266: |
| + | board: d1_mini |
| + | restore_from_flash: true |
| + | |
| + | [...] |
| + | |
| + | # example: https://github.com/andyboeh/esphome-dmx512/blob/master/example_4x_adj_vbar_pak.yaml |
| + | |
| + | external_components: |
| + | - source: github://andyboeh/esphome-dmx512 |
| + | |
| + | uart: |
| + | id: uart_bus |
| + | baud_rate: 250000 |
| + | tx_pin: GPIO2 # D4 |
| + | stop_bits: 2 |
| + | |
| + | dmx512: |
| + | id: dmx |
| + | uart_id: uart_bus |
| + | #enable_pin: 33 |
| + | tx_pin: GPIO2 # D4 |
| + | uart_num: 1 |
| + | |
| + | |
| + | light: |
| + | - platform: rgb |
| + | name: "Vortrag Scheinwerfer A" |
| + | id: light_a |
| + | red: dmx_a_red |
| + | green: dmx_a_green |
| + | blue: dmx_a_blue |
| + | on_turn_on: |
| + | - lambda: |- |
| + | id(dmx_a_macro).set_level(0.0); |
| + | id(dmx_a_speed).set_level(0.0); |
| + | id(dmx_a_mode).set_level(0.0); |
| + | id(dmx_a_dim).set_level(1.0); |
| + | on_turn_off: |
| + | - lambda: |- |
| + | id(dmx_a_dim).set_level(0.0); |
| + | effects: |
| + | - random |
| + | |
| + | - platform: rgb |
| + | name: "Vortrag Scheinwerfer B" |
| + | id: light_b |
| + | red: dmx_b_red |
| + | green: dmx_b_green |
| + | blue: dmx_b_blue |
| + | on_turn_on: |
| + | - lambda: |- |
| + | id(dmx_b_macro).set_level(0.0); |
| + | id(dmx_b_speed).set_level(0.0); |
| + | id(dmx_b_mode).set_level(0.0); |
| + | id(dmx_b_dim).set_level(1.0); |
| + | on_turn_off: |
| + | - lambda: |- |
| + | id(dmx_b_dim).set_level(0.0); |
| + | effects: |
| + | - random |
| + | |
| + | - platform: rgb |
| + | name: "Hackcenter Scheinwerfer A" |
| + | id: light_c |
| + | red: dmx_c_red |
| + | green: dmx_c_green |
| + | blue: dmx_c_blue |
| + | on_turn_on: |
| + | - lambda: |- |
| + | id(dmx_c_macro).set_level(0.0); |
| + | id(dmx_c_speed).set_level(0.0); |
| + | id(dmx_c_mode).set_level(0.0); |
| + | id(dmx_c_dim).set_level(1.0); |
| + | on_turn_off: |
| + | - lambda: |- |
| + | id(dmx_c_dim).set_level(0.0); |
| + | effects: |
| + | - random |
| + | |
| + | - platform: rgb |
| + | name: "Hackcenter Scheinwerfer B" |
| + | id: light_d |
| + | red: dmx_d_red |
| + | green: dmx_d_green |
| + | blue: dmx_d_blue |
| + | on_turn_on: |
| + | - lambda: |- |
| + | id(dmx_d_macro).set_level(0.0); |
| + | id(dmx_d_speed).set_level(0.0); |
| + | id(dmx_d_mode).set_level(0.0); |
| + | id(dmx_d_dim).set_level(1.0); |
| + | on_turn_off: |
| + | - lambda: |- |
| + | id(dmx_d_dim).set_level(0.0); |
| + | effects: |
| + | - random |
| + | |
| + | |
| + | output: |
| + | # Group A RED |
| + | - platform: dmx512 |
| + | channel: 1 |
| + | universe: dmx |
| + | id: dmx_a_red |
| + | |
| + | # Group A GREEN |
| + | - platform: dmx512 |
| + | channel: 2 |
| + | universe: dmx |
| + | id: dmx_a_green |
| + | |
| + | # Group A BLUE |
| + | - platform: dmx512 |
| + | channel: 3 |
| + | universe: dmx |
| + | id: dmx_a_blue |
| + | |
| + | # Group A MACRO |
| + | - platform: dmx512 |
| + | channel: 4 |
| + | universe: dmx |
| + | id: dmx_a_macro |
| + | |
| + | # Group A SPEED/STROBE |
| + | - platform: dmx512 |
| + | channel: 5 |
| + | universe: dmx |
| + | id: dmx_a_speed |
| + | |
| + | # Group A MODE |
| + | - platform: dmx512 |
| + | channel: 6 |
| + | universe: dmx |
| + | id: dmx_a_mode |
| + | |
| + | # Group A MASTER DIM |
| + | - platform: dmx512 |
| + | channel: 7 |
| + | universe: dmx |
| + | id: dmx_a_dim |
| + | |
| + | # Group B RED |
| + | - platform: dmx512 |
| + | channel: 9 |
| + | universe: dmx |
| + | id: dmx_b_red |
| + | |
| + | # Group B GREEN |
| + | - platform: dmx512 |
| + | channel: 10 |
| + | universe: dmx |
| + | id: dmx_b_green |
| + | |
| + | # Group B BLUE |
| + | - platform: dmx512 |
| + | channel: 11 |
| + | universe: dmx |
| + | id: dmx_b_blue |
| + | |
| + | # Group B MACRO |
| + | - platform: dmx512 |
| + | channel: 12 |
| + | universe: dmx |
| + | id: dmx_b_macro |
| + | |
| + | # Group B SPEED/STROBE |
| + | - platform: dmx512 |
| + | channel: 13 |
| + | universe: dmx |
| + | id: dmx_b_speed |
| + | |
| + | # Group B MODE |
| + | - platform: dmx512 |
| + | channel: 14 |
| + | universe: dmx |
| + | id: dmx_b_mode |
| + | |
| + | # Group B MASTER DIM |
| + | - platform: dmx512 |
| + | channel: 15 |
| + | universe: dmx |
| + | id: dmx_b_dim |
| + | |
| + | # Group C RED |
| + | - platform: dmx512 |
| + | channel: 17 |
| + | universe: dmx |
| + | id: dmx_c_red |
| + | |
| + | # Group C GREEN |
| + | - platform: dmx512 |
| + | channel: 18 |
| + | universe: dmx |
| + | id: dmx_c_green |
| + | |
| + | # Group C BLUE |
| + | - platform: dmx512 |
| + | channel: 19 |
| + | universe: dmx |
| + | id: dmx_c_blue |
| + | |
| + | # Group C MACRO |
| + | - platform: dmx512 |
| + | channel: 20 |
| + | universe: dmx |
| + | id: dmx_c_macro |
| + | |
| + | # Group C SPEED/STROBE |
| + | - platform: dmx512 |
| + | channel: 21 |
| + | universe: dmx |
| + | id: dmx_c_speed |
| + | |
| + | # Group C MODE |
| + | - platform: dmx512 |
| + | channel: 22 |
| + | universe: dmx |
| + | id: dmx_c_mode |
| + | |
| + | # Group C MASTER DIM |
| + | - platform: dmx512 |
| + | channel: 23 |
| + | universe: dmx |
| + | id: dmx_c_dim |
| + | |
| + | # Group D RED |
| + | - platform: dmx512 |
| + | channel: 25 |
| + | universe: dmx |
| + | id: dmx_d_red |
| + | |
| + | # Group D GREEN |
| + | - platform: dmx512 |
| + | channel: 26 |
| + | universe: dmx |
| + | id: dmx_d_green |
| + | |
| + | # Group D BLUE |
| + | - platform: dmx512 |
| + | channel: 27 |
| + | universe: dmx |
| + | id: dmx_d_blue |
| + | |
| + | # Group D MACRO |
| + | - platform: dmx512 |
| + | channel: 28 |
| + | universe: dmx |
| + | id: dmx_d_macro |
| + | |
| + | # Group D SPEED/STROBE |
| + | - platform: dmx512 |
| + | channel: 29 |
| + | universe: dmx |
| + | id: dmx_d_speed |
| + | |
| + | # Group D MODE |
| + | - platform: dmx512 |
| + | channel: 30 |
| + | universe: dmx |
| + | id: dmx_d_mode |
| + | |
| + | # Group D MASTER DIM |
| + | - platform: dmx512 |
| + | channel: 31 |
| + | universe: dmx |
| + | id: dmx_d_dim |
| + | </pre> |
| | | |
| | | |
| [[Category:Räume]] | | [[Category:Räume]] |
Ein DMX-Bus zieht sich durch unsere Räume. Die daran angeschlossenen Geräte sind per Home Assistant und über die Taster am Eingang steuerbar.
Die Lichter im Vortragsbereich und im Gang zu den Werkstätten sind über die Taste 1, die Lichter im Hackcenter sind über die Taste 2 jeweils auf Kanal 1-7 steuerbar. Page Select drücken, um in die jeweils andere Gruppe zu wechseln.