M5-Core: Unterschied zwischen den Versionen

Aus Attraktor Wiki

Wechseln zu: Navigation, Suche
Zeile 40: Zeile 40:
 
SDIO master/salve 50MHz
 
SDIO master/salve 50MHz
 
SD-card interface support
 
SD-card interface support
 
 
 
  
 
Dokumentationsseite: https://docs.m5stack.com/#/en/core/basic
 
Dokumentationsseite: https://docs.m5stack.com/#/en/core/basic
  
 +
Steckbarkeit
  
Steckbarkeit
 
 
[[image:M5-0004.jpg|500px]]
 
[[image:M5-0004.jpg|500px]]
 
 
 
 
  
 
Ein Bottom mit Akku und M-Bus.
 
Ein Bottom mit Akku und M-Bus.

Version vom 20. Februar 2020, 19:32 Uhr

M5Stack ist die Basisversion Der M5-Reihen. Die M5Stack Cores befinden sich in einem ca. 5x5 cm großen Modulgehäuse (M5). Dieses enthält eine Platine mit einem ESP32 und diverse zusätzliche IC’s.

M5-0002.jpg

IP5306 - Powermanagement IC: 5V in - 5V out- Batterieladung und -kontrolle EA3036 - Powermanagement IC: 5V in - 3x Uout CP2014 - USB-TTL-Wandler

M5-0003.jpg

Produkteigenschaften:

   5V DC power supply
   USB Type-C
   ESP32-based
   Case Material: PC + ABS
   4 MByte flash
   Speaker, 3 Buttons,Color LCD(320*240), 1 Reset
   2.4G Antenna: Proant 440
   TF card slot (16G Maximum size)
   Battery Socket & 150 mAh Lipo Battery
   Extendable Pins & Holes
   Grove Port
   M-Bus Socket & Pins
   Program Platform:  
       UIFlow], http://flow.m5stack.com/ 
       MicroPython, http://micropython.org/
       Arduino, http://www.arduino.cc/
   Product Size 54.2mm x 54.2mm x 17.9mm
   Product weight 47.2g* 

ESP32-Eigenschaften: 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS Integrated 520 KB SRAM Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP Integrated dual mode Bluetooth (classic and BLE) Hall sensor 10x capactive touch interface 32 kHz crystal oscillator PWM/timer input/output available on every GPIO pin SDIO master/salve 50MHz SD-card interface support

Dokumentationsseite: https://docs.m5stack.com/#/en/core/basic

Steckbarkeit

M5-0004.jpg

Ein Bottom mit Akku und M-Bus.