M5-Core

Aus Attraktor Wiki

Wechseln zu: Navigation, Suche

M5Stack ist die Basisversion Der M5-Reihen. Die M5Stack Cores befinden sich in einem ca. 5x5 cm großen Modulgehäuse (M5). Dieses enthält eine Platine mit einem ESP32 und diverse zusätzliche IC’s.

M5-0002.jpg

IP5306 - Powermanagement IC: 5V in - 5V out- Batterieladung und -kontrolle EA3036 - Powermanagement IC: 5V in - 3x Uout CP2014 - USB-TTL-Wandler

M5-0003.jpg

Produkteigenschaften:

   5V DC power supply
   USB Type-C
   ESP32-based
   Case Material: PC + ABS
   4 MByte flash
   Speaker, 3 Buttons,Color LCD(320*240), 1 Reset
   2.4G Antenna: Proant 440
   TF card slot (16G Maximum size)
   Battery Socket & 150 mAh Lipo Battery
   Extendable Pins & Holes
   Grove Port
   M-Bus Socket & Pins
   Program Platform:  
       UIFlow], http://flow.m5stack.com/ 
       MicroPython, http://micropython.org/
       Arduino, http://www.arduino.cc/
   Product Size 54.2mm x 54.2mm x 17.9mm
   Product weight 47.2g* 

ESP32 Merkmale:

   240 MHz Doppelkern-Mikrocontroller Tensilica LX6 mit 600 DMIPS
   Integrierter 520 KB SRAM
   Integrierter 802.11b/g/n HT40 Wi-Fi-Transceiver, Basisband, Stack und LWIP
   Integriertes Dualmodus-Bluetooth (klassisch und BLE)
   Hallsensor
   32-kHz-Kristall-Oszillator
   PWM/Timer-Eingang/Ausgang an jedem GPIO-Pin verfügbar
   Unterstützung der SD-Karten-Schnittstelle

Dokumentationsseite: https://docs.m5stack.com/#/en/core/basic

Steckbarkeit

M5-0004.jpg

Ein Bottom mit Akku und M-Bus.

Diese Seite wurde zuletzt am 20. Februar 2020 um 20:05 Uhr geändert. Diese Seite wurde bisher 3.078 mal abgerufen.