User:Smay4finger: Unterschied zwischen den Versionen

Aus Attraktor Wiki

Wechseln zu: Navigation, Suche
Zeile 1: Zeile 1:
* [[/AVR-JTAGICE/]]
 
 
 
=== X-Application in full screen on Raspberry Pi / BeagleBone Black/White ===
 
=== X-Application in full screen on Raspberry Pi / BeagleBone Black/White ===
  
Zeile 6: Zeile 4:
  
 
Options ''-dpms'' and ''-s 0'' turn off screen saver, option ''-nocursor'' hides the mouse cursor.
 
Options ''-dpms'' and ''-s 0'' turn off screen saver, option ''-nocursor'' hides the mouse cursor.
 +
 +
=== Linksammlung ===
 +
 +
* [http://physicus.free.fr/observatoire/presentation.php Geo-Magnetometer]
  
 
=== Eagle nach G-Code ===
 
=== Eagle nach G-Code ===

Version vom 28. Juli 2014, 19:54 Uhr

X-Application in full screen on Raspberry Pi / BeagleBone Black/White

/usr/bin/xinit $PROGRAM -- -dpms -s 0 -nocursor

Options -dpms and -s 0 turn off screen saver, option -nocursor hides the mouse cursor.

Linksammlung

Eagle nach G-Code

  • pcb2gcode
sudo aptitude install build-essential autoconf libtool gerbv libboost-dev libboost-program-options-dev libglibmm-2.4-dev libgtkmm-2.4-dev
git clone git://pcb2gcode.git.sourceforge.net/gitroot/pcb2gcode/pcb2gcode
cd pcb2gcode
autoreconf
./configure
make

Vorsicht, pcb2gcode rechnet alles in Inches!

Script zur Erstellung von GCode aus Eagle-Files media:pcbcam.gz

Das Skript erzeugt aus einem Eagle-Board-File (Endung .brd) mehrere G-Code-Files und Postscript-Files für die Erstellung der Lötstoppmaske. Die erzeugten Dateien sind im Einzelnen:

back.ngc 
Lötseite
front.ngc 
Bestückungsseite
outline.ngc 
Ausfräsung der Platine
drill.ngc 
Bohrungen
back_stop.ps 
Lötstoppmaske Lötseite
front_stop.ps 
Lötstoppmaske Bestückungsseite

Alles

Smay4finger/AVR-JTAGICESmay4finger/SunFireX4540Smay4finger/SunFireX4600
Smay4finger/Waffeln