|
|
(3 dazwischenliegende Versionen des gleichen Benutzers werden nicht angezeigt) |
Zeile 1: |
Zeile 1: |
| M5Stack ist die Basisversion Der M5-Reihen. Die M5Stack Cores befinden sich in einem ca. 5x5 cm großen Modulgehäuse (M5). Dieses enthält eine Platine mit einem ESP32 und diverse zusätzliche IC’s. | | M5Stack ist die Basisversion Der M5-Reihen. Die M5Stack Cores befinden sich in einem ca. 5x5 cm großen Modulgehäuse (M5). Dieses enthält eine Platine mit einem ESP32 und diverse zusätzliche IC’s. |
| | | |
− | [[image:M5-0002.jpg]] | + | [[image:M5-0002.jpg|500px]] |
| | | |
| IP5306 - Powermanagement IC: 5V in - 5V out- Batterieladung und -kontrolle | | IP5306 - Powermanagement IC: 5V in - 5V out- Batterieladung und -kontrolle |
Zeile 7: |
Zeile 7: |
| CP2014 - USB-TTL-Wandler | | CP2014 - USB-TTL-Wandler |
| | | |
− | [[image:M5-0003.jpg]] | + | [[image:M5-0003.jpg|500px]] |
| | | |
| Produkteigenschaften: | | Produkteigenschaften: |
Zeile 29: |
Zeile 29: |
| Product weight 47.2g* | | Product weight 47.2g* |
| | | |
− | ESP32-Eigenschaften: | + | ESP32 Merkmale: |
− | 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
| + | |
− | Integrated 520 KB SRAM
| + | |
− | Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
| + | |
− | Integrated dual mode Bluetooth (classic and BLE)
| + | |
− | Hall sensor
| + | |
− | 10x capactive touch interface
| + | |
− | 32 kHz crystal oscillator
| + | |
− | PWM/timer input/output available on every GPIO pin
| + | |
− | SDIO master/salve 50MHz
| + | |
− | SD-card interface support
| + | |
− | | + | |
− | | + | |
| | | |
| + | 240 MHz Doppelkern-Mikrocontroller Tensilica LX6 mit 600 DMIPS |
| + | Integrierter 520 KB SRAM |
| + | Integrierter 802.11b/g/n HT40 Wi-Fi-Transceiver, Basisband, Stack und LWIP |
| + | Integriertes Dualmodus-Bluetooth (klassisch und BLE) |
| + | Hallsensor |
| + | 32-kHz-Kristall-Oszillator |
| + | PWM/Timer-Eingang/Ausgang an jedem GPIO-Pin verfügbar |
| + | Unterstützung der SD-Karten-Schnittstelle |
| | | |
| Dokumentationsseite: https://docs.m5stack.com/#/en/core/basic | | Dokumentationsseite: https://docs.m5stack.com/#/en/core/basic |
− |
| |
| | | |
| Steckbarkeit | | Steckbarkeit |
− | [[image:M5-0004.jpg]]
| |
− |
| |
− |
| |
− |
| |
| | | |
| + | [[image:M5-0004.jpg|500px]] |
| | | |
| Ein Bottom mit Akku und M-Bus. | | Ein Bottom mit Akku und M-Bus. |
Zeile 58: |
Zeile 50: |
| | | |
| | | |
− | [[Category:M5-Hardware]] | + | [[Category:M5Stack-Hardware]] |
Aktuelle Version vom 20. Februar 2020, 20:05 Uhr
M5Stack ist die Basisversion Der M5-Reihen. Die M5Stack Cores befinden sich in einem ca. 5x5 cm großen Modulgehäuse (M5). Dieses enthält eine Platine mit einem ESP32 und diverse zusätzliche IC’s.
IP5306 - Powermanagement IC: 5V in - 5V out- Batterieladung und -kontrolle
EA3036 - Powermanagement IC: 5V in - 3x Uout
CP2014 - USB-TTL-Wandler
Produkteigenschaften:
5V DC power supply
USB Type-C
ESP32-based
Case Material: PC + ABS
4 MByte flash
Speaker, 3 Buttons,Color LCD(320*240), 1 Reset
2.4G Antenna: Proant 440
TF card slot (16G Maximum size)
Battery Socket & 150 mAh Lipo Battery
Extendable Pins & Holes
Grove Port
M-Bus Socket & Pins
Program Platform:
UIFlow], http://flow.m5stack.com/
MicroPython, http://micropython.org/
Arduino, http://www.arduino.cc/
Product Size 54.2mm x 54.2mm x 17.9mm
Product weight 47.2g*
ESP32 Merkmale:
240 MHz Doppelkern-Mikrocontroller Tensilica LX6 mit 600 DMIPS
Integrierter 520 KB SRAM
Integrierter 802.11b/g/n HT40 Wi-Fi-Transceiver, Basisband, Stack und LWIP
Integriertes Dualmodus-Bluetooth (klassisch und BLE)
Hallsensor
32-kHz-Kristall-Oszillator
PWM/Timer-Eingang/Ausgang an jedem GPIO-Pin verfügbar
Unterstützung der SD-Karten-Schnittstelle
Dokumentationsseite: https://docs.m5stack.com/#/en/core/basic
Steckbarkeit
Ein Bottom mit Akku und M-Bus.