User:Smay4finger: Unterschied zwischen den VersionenAus Attraktor Wiki
Version vom 18. Oktober 2016, 08:08 UhrInhaltsverzeichnisAbout meMAIL: stefan@attraktor.org XMPP: stefan@makerspace.hamburg
X-Application in full screen on Raspberry Pi / BeagleBone Black/White/usr/bin/xinit $PROGRAM -- -dpms -s 0 -nocursor Options -dpms and -s 0 turn off screen saver, option -nocursor hides the mouse cursor. Info-Beamer mit systemd[Unit] Description=Info-Beamer After=network.target [Service] ExecStart=/usr/local/bin/info-beamer /home/pi/info-beamer/active Restart=on-failure [Install] WantedBy=multi-user.target SocketCANVirtueller Bus: sudo modprobe vcan sudo ip link add dev vcan0 type vcan sudo ip link set up vcan0 LinksammlungEagle nach G-Code
sudo aptitude install build-essential autoconf libtool gerbv libboost-dev libboost-program-options-dev libglibmm-2.4-dev libgtkmm-2.4-dev git clone git://pcb2gcode.git.sourceforge.net/gitroot/pcb2gcode/pcb2gcode cd pcb2gcode autoreconf ./configure make Vorsicht, pcb2gcode rechnet alles in Inches! Script zur Erstellung von GCode aus Eagle-Files media:pcbcam.gzDas Skript erzeugt aus einem Eagle-Board-File (Endung .brd) mehrere G-Code-Files und Postscript-Files für die Erstellung der Lötstoppmaske. Die erzeugten Dateien sind im Einzelnen:
SpielenAlles |